19
RESTORE SETTING
If you reset the TV to the factory settings, all your present settings on picture & sound will be
erased and replaced by the factory’s default settings. However, picture setting in PC mode and
parental setting will not be erased.
MTS (Multi-channel Television Sound) SETTING
This feature allows reception of sound other than the main audio for the program.
1.
Press the
MENU
button.
2.
Use the
or
button to select the
TV setting menu
, then press the
button to confirm the
setting.
3.
Use the
or
button to select
MTS menu
, and press the or button to select the options
(Mono, Stereo, SAP)
4.
To exit the MAIN MENU and return to the normal screen, press the
EXIT
button on remote
control.
Note:
• MTS only operates while in TV mode.
• The SAP (Secondary Audio Programs) feature allows a TV station
to broadcast other information, which could be audio in another
language.
TV SETUP
TV SETTING
1.
Press the
MENU
button.
2.
Use the
or
button to select the
TV setting menu
, then press the
button to confirm
the setting.
3.
Use the
or
button to select the
Channel no.
setting and use the or
button to
change the channel no.
4.
Use the
or
button to select the
Tuning mode
and use the or button to change from
AIR (over-the-air broadcasts) to CABLE (cable/satellite broadcasts).
5.
Use the
or
button to select the
Auto tune
and press the or
button to confirm the
selection. The unit will immediately search through all possible TV channels and store
those channels with signals in memory. After this is complete, the unit will switch to the
first channel found.
6.
To exit the MAIN MENU and return to the normal screen, press the
EXIT
button.
Note :
This option is available in TV mode only.
Remarks:
Channel no.
: 2-69 channel for Air mode, 1-125 channel for Cable
mode.
Tuning mode
: Air or Cable mode are available.
Auto tune
: Searches for usable stations and stores them in
memory.
Skip
:
ON
- Skip weak channels.
OFF
- No channel skip.
Fine tune
: The frequency changes to allow fine tuning.
AFC
: Auto frequency control.
MTS
: Select the Mono sound/Stereo sound/Secondary
Audio Program (SAP). Refer to the section titled
“MTS SETTING” for instructions.
TV MODE
TV MODE
PLV36190_ib_eng_15-20_wDVI.pmd
18/01/2007, 17:03
19
