background image

Troubleshooting Tips

System will not turn on
•   Check power cord for a secure connection.
•   Unplug the unit for a moment, and then plug 

into power source again.

•   Check the outlet by plugging in another 

device.

No sound
•   Increase the volume setting.
•   Check connection to speakers.
•   Check that you have selected the appropriate 

function: CD, TUNER, LINE IN/AUX or BT.

•  Make sure mute is off .
•  Make sure headphones are not plugged in.

Poor radio reception
•   Check antenna connection.
• Move 

antenna.

•  Turn off nearby electrical appliances, such 

as hair dr yer, vacuum cleaner, microwave, 
fl uorescent lights.

CD does not play
•   Check that CD is in the tray.
•   Check that CD label is facing up.
•   Check that PAUSE mode is not on.
•   Check that CD function is selected.
•   Use CD lens cleaner.
•   Clean the disc.
•  Try another CD.

CD sound skips
•   Clean the disc.
•   Check disc for warping, scratches, or other 

damage.

•   Check if something is causing the system to 

vibrate. If so, move the system.

•  Make sure the speakers are at least 3 feet away 

or on a diff erent surface from the main unit. 

CD button will not respond, or does not change 
discs when you press DISC SKIP
•  Switch to another function (TUNER, LINE IN/

AUX or BT) and then back to CD. 

Remote control does not work
•   Check that the batteries are properly installed.
•   Replace weak batteries.
•   Check the system is plugged into power 

source.

•   Point the remote directly at the system’s front 

panel.

•  Move closer to the system.
•   Remove any obstacles between the remote 

and the system.

- 11 -

Summary of Contents for CD2965SB














Reviews: