MPB-R/U/2016
tel. (22) 751 95 50
www.venture.pl
fax. (22) 751 22 59
17/33
5.2 Review and maintenance
The set between routine checks and maintenance need to be determined by user, based on the observation of unit and specific conditions of
use, in order to include specific work conditions. The set cannot be longer than introduced below
In the case of irregularities the device must be turn off and subjected to review, maintenance and possible repairs / cleaning (when dirt
occurs). Examples of reasons for device to work in emergency mode are given in Appendix C.
Staff operating the device must be familiar with it normal working conditions. If the fan work differ from it normal working conditions it need
to be turn off from work and inspected.
Detailed information about komponents and it tightening torque is available on request.
Recommended daily review, not less frequently than once a week.:
Device is undamaged, stable and works properly
There are not any leaks, smoke from motor
Device does not emit any untypical noise, and does not heat up excessively
Device is clean (general control), corrosion does not occur (general control)
Wires are not damaged
there are no untypical leaks from fan
Covers are in proper state and clean
Mmonthly review
Fan current value is not higher than beginning value
The values of generated vibration did not increase (according to beginning value)
Device and covers are clean
Device is clean, filter is not clogged.
Review once per 3 months, not less than 6 month and 3000 hours of work
Corrosion does not occur
Fasteners state is proper (they are properly tightened)
Security devices are working and set properly, protection against electrical shock is effective.
Motor insulation resistance value is correct
Structure is complete, components are not damaged (
e.g. by abrasion
)
Fan review made by Venture Industries Sp. z o.o. service is recommended.
6. REPAIR, WARRANTY
Use only original spare parts and original accessories. Fan repairs need to be made by Venture Industries Sp. z o.o. service or outside, after
manufacturer permission. Warrantee conditions are described in guarantee card.
7. DISMANTLING AND RECYCLING
Disconnect unit from its power supply, and dismount according to the guidelines from section 1 of this instruction. Therefore, please deposit all
left-over material and packaging in their corresponding recycling containers and hand in the replaced machines to the nearest handler of this
type of waste product.
