Ventura DAI7T02B, Instruction Manual / Installation Manual

Page: 17 / 18

back from the ON-condition into the stand-by-mode.
· When the control is switched- ON the ON/OFF-key has priority over
all other keys, so that the control can be switched-OFF anytime,
even in case of multiple or continuous operation of keys.
· In the stand-by mode a continous operation will not be signalized.
However, before the electronic control can be switched-ON again, it
has to recognize that all keys are not operated.
You can lock the controls to prevent unintended use (for example
children accidentally turning the cooking zondes on).
Timer function (optional)
Cooking vessels (Fig. 14)
- a magnet-attracting vessel may be a suitable vessel for induction
cooking
- prefer vessels which are especially declared to be suitable for
induction cooking
-
- a vessel with the same diameter as zones ensures the maximum
exploitation of power
- a smaller vessel reduces power exploitation, but does not cause
any energy loss We would anyhow not recommend the use of
vessels with diameters smaller than 14 cm.
- stainless-steel vessels with multi-layer or ferritic stainless-steel
- cast-iron preferably enamel-bottomed vessels to avoid scratching
the pyroceram surface
- we do not recommend the use of any glass, ceramic, earthenware,
alluminium, copper or non-magnetic (austenitic) stainlesssteel
vessels.
Using Child Lock Function
When the controls are locked, all the controls except the OFF control
are disabled.
To lock the controls
Touch the child lock key (7) for the 3 seconds. The indicator near
To unlock the controls
Touch and hold the keylock control for a while.
16
You can use the timer in two different ways:
• You can use it as a minute minder. In this case, the timer will not turn
any cooking zone off when the set time is up.
• You can set it to turn one cooking zone off after the set time is up.
• You can set the timer for up to 99 minutes.
Using the Timer as a Minute Minder
If you are not selecting any cooking zone
1. Make sure at least one cooking is turned on.
Note: you can use the minute minder even if you’re not selecting
any cooking zone.
2. Touch the Timer key (8). The minder indicator will start flashing
and “10” will show in the timer display.
3. Set the time by touching the “-” or “+” control of the timer
Hint: Touch the “-” or “+” control of the timer once to decrease or
increase by 1 minute.
Touch and hold the “-” and “+” control of the timer to decrease or
increase by 10 minutes.
Touching the “-” and “+” together, the timer is cancelled, and the timer
indicator will turn off.
Setting the timer to turn one or more cooking zones off
If the timer is set on one zone:
1. Select the relevant cooking zone which is working by touching
the zone select key (4).
2. Press the Timer key (8), the timing indicator flashes, and you
can set the timer at this point.
3. Using the “+” and “-” buttons, you can realize the setting of timing
from 1 to 99 minutes.
Hint: Touch the “-” or “+” control of the timer once will decrease or
increase by 1 minute.
Touch and hold the “-” or “+” control of the timer will decrease or
increase by 1 minute.
Touch and hold the “-” or “+” control of the timer will decrease or
increase by 10 minutes.
Touching the “-” and “+” together, the timer is cancelled, and the
timer indicator will turn off.
4. When the time is set, it will begin to count down immediately.
The display will show the remaining time and the timer indicator flash
for 5 seconds.
NOTE: The red dot next to power level indicator will illuminate
indicating that zone is selected.
5. When cooking timer expires, the corresponding cooking zone will
be switch off automatically.
Other cooking will keep operating if they are turned on previously.
6. When using “the timer as an alarm” and “the timer to switch off the
zones ”together, the display will show the remaining time off the zones”
togetheri the display will show the remaining time of alarm as first
priority. Press cooking zone to show the remaining time of switch
off timer.
Pause Function;
The hob have a handy restart function to pause and restart the cooking
process if you’re interrupted.
1. When the hob is on and working, press the pause key (H) and hold for
3 seconds, all burner will stop working,
and all LED indicator will show the symbol “=”.
2. Press the pause key (H) and hold for 3 seconds again, all setting will
restart at previous setting.
When you have finished cooking;
Touching the slider regulating key (D) to decrease the power to “0” level.
4. When the time is set, it will begin to count down immediately. The
display will show the remaining time.
5. Buzzer will bips for 30 seconds and the timer indicator will turn off
when the setting time finished.