Vents VUE2 150 P EC Comfo A6, User Manual

Page: 3 / 24

3
VUE2 150 P ЕС Comfo
• Read this user's manual carefully prior to the operation and installation of the air handling unit with heat and energy recovery,
hereinafter the unit.
• Installation and operation of the unit shall be performed in accordance with the present user's manual as well as the provisions
of all the applicable local and national construction, electrical and technical codes and standards.
• The warnings contained in the present user's manual must be considered most seriously since they contain vital personal safety
information.
• Failure to follow the safety regulations may result in an injury or unit damage.
• Upon familiarization keep the user's manual for the entire service life of the unit.
• While transferring equipment control the user's manual must be turned over to the receiving operator.
The symbols used in the present user's manual have the following meaning:
UNIT INSTALLATION SAFETY PRECAUTIONS
ATTENTION!
RESTRICTIONS!
The unit must be disconnected from the power
supply prior to every installation or repair
operation.
The unit must be properly grounded!
The unit must not be operated outside the
temperature range stated in the user's manual
or in aggressive or explosive environments.
Do not use damaged equipment or
conductors to connect the unit to the power
mains.
While installing the unit follow the safety
regulations specific to the use of electric tools.
Unpack the unit with care.
Do not change the power cord length at your
own discretion. Do not bend the power cord.
Avoid damaging the power cord.
Do not position any heating devices or other
equipment in close proximity to the unit
power cord.
ТРЕБОВАНИЯ БЕЗОПАСНОСТИ