8
VUT/VUE 250 V/H mini A12/A1
www.ventilation-system.com
2. Attach the wall mounting brackets to a wall or to a ceiling considering the wall material and the unit weight.
WARNING! Ceiling mounting is only available for the units with a polymerized cellulose heat exchanger.
260 mm
Unit wall mounting
Suspended mounting
260 mm
3. Install the unit on the mounting brackets. Tighten the triangular fixing screws on the mounting brackets.
SUSPENDED MOUNTING USING L-SHAPED BRACKETS
(only for VUЕ models)
When using the L-shaped brackets, the unit can be mounted close to the ceiling or on the threaded rods.
Screw
Dowel
min 400 mm
min 400 mm
Nut
Threaded rod
Washer
Vibration absorbing
rubber
Washer
Nut and lock nut
Vibration absorbing
rubber
UNIT FLOOR MOUNTING
Install the unit on the pre-mounted floor supports, minimum 150 mm height, to ensure sufficient access for the drain pipe connection to the U-trap
and for condensate drain system installation.
150 mm
150 mm