Vents VUE 250 H mini A1, User Manual, Page: 12 / 20

12
VUT/VUE 250 V/H mini A12/A1
www.ventilation-system.com
5. Mount the speed controller front part:
• Install the speed controller front panel.
• Fix the front panel with a washer and a nut.
• Install the control knob.
• The speed controller mounting is completed.
1 2
3 4
A12 SENSOR SPEED CONTROLLER MOUNTING
CAUTION!
Makes sure that the speed controller is intact. Do not use damaged speed controllers. Do not mount the speed controller onto an uneven surface. While
tightening the self-tapping screws do not apply excessive force to prevent speed controller casing deformation.
The sensor speed controller is installed as follows:
• Use a screwdriver to carefully undo the clips of the speed controller front panel.
• Remove the back panel.
• Route the cable in the wall to the panel installation site.
• Attach the back panel on the wall or in the mounting box through the mounting holes.
• To install the speed controller front panel clip it in place.