3
АОЕ
SAFETY REQUIREMENTS
•
Read the user’s manual carefully prior to the operation and installation of the unit.
•
Installation and operation of the unit shall be performed in accordance with the present user’s manual as well as the provisions
of all the applicable local and national construction, electrical and technical codes and standards.
•
The warnings contained in the user’s manual must be considered most seriously since they contain vital personal safety
information.
•
Failure to follow the safety regulations may result in an injury or unit damage.
•
Read the manual carefully and keep it as long as you use the unit.
•
While transferring the unit control the user’s manual must be turned over to the receiving operator.
Symbol legend used in the manual:
UNIT MOUNTING SAFETY PRECAUTIONS
WARNING!
DO NOT!
The unit must be disconnected from the power
supply prior to every installation or repair
operation.
The unit must not be operated outside
the temperature range stated in the user's
manual or in aggressive or explosive
environments.
Do not install heating equipment or any other
equipment close to the unit cable.
Do not use damaged equipment or
conductors to connect the unit to power
mains.
While installing the unit follow the safety
regulations specific to the use of electric tools.
Unpack the unit with care.
Do not change the power cord length at your
own discretion. Do not bend the power cord.
Avoid damaging the power cord.
Use the unit as intended only.
