Service - 25
Cleaning and General Maintenance
For best results, and to maintain the fi nish of the
power unit, clean or wash the power unit to remove
accumulated clippings, leaves, dirt, and other debris
when the job is fi nished.
Proper and timely service of this power unit is critical
to keep the power unit is a safe and reliable operat-
ing condition. Follow the Maintenance Schedule at
the end of the service section.
Throughout the Service Section, different access
points are referred to. Following is a list of shields
and covers that may need to be removed or opened
during service.
Always set the parking brake, shut off power
unit engine, remove the ignition key, and ensure
all moving parts have come to a complete stop
before inspecting components or attempting any
repair or adjustment.
Attention
If any component requires replacement, use only
original Ventrac replacement parts.
SERVICE
1. Tunnel
Access
Cover
2. Seat
Plate
3. Engine Drive Belt Shield
2
2
3
3
1
1
4. Engine
Hood
5. Hydraulic
Access
Cover
4
4
5
5
6
6
7
7
6. Left Center Pivot Canvas
7. Left Center Pivot Canvas
8
8
9
9
8. Top Center Pivot Guard
9. Left Center Pivot Guard
10. Right Center Pivot Guard
10
10