background image

WARRANTY

Warranty - 25

LIMITED WARRANTY - VENTRAC TURF EQUIPMENT

equipment or other than as recommended in the operator’s manual or other operational instructions provided by V.P.I.; (h) repairs 
or replacements resulting from parts or accessories which have adversely affected the operation, performance or durability of the 
turf equipment; or (i) damage or defects due to or arising out of repair of Ventrac turf equipment by person or persons other than an 
authorized Ventrac service dealer or the installation of parts other than genuine Ventrac parts or Ventrac recommended parts.

The sole liability of V.P.I

.

 with respect to this warranty shall be repair and replacement as set forth herein.  V.P.I. shall have no 

liability for any other cost, loss, or damage. In particular V.P.I

 

shall have no liability or responsibility for: (i) expenses relating to 

gasoline, oil, lubricants; (ii) loss, cost, or expense relating to transportation or delivery of turf equipment from the location of owner 
or location where used by owner to or from any authorized Ventrac dealer; (iii) travel time, overtime, after hours time or other 
extraordinary repair charges or charge relating to repairs or replacements outside of normal business hours at the place of business 
of an authorized Ventrac

 

dealer; (iv) rental of like or similar replacement equipment during the period of any warranty repair or 

replacement work; (v) any telephone or telegram charges; (vi) loss or damage to person or property other than that covered by the 
terms of this warranty; (vii) any claims for lost revenue, lost profi t or additional cost or expense incurred as a result of a claim of 
breach of warranty; or (viii) attorney’s fees.

The remedies of buyer set forth herein are exclusive and are in lieu of all other remedies. The liability of V.P.I., whether in contract, 
tort, under any warranty, or otherwise, shall not extend beyond its obligation as set forth herein. V.P.I. shall not be liable for cost of 
removal or installation nor shall V.P.I. be responsible for any direct, indirect, special or consequential damages of any nature. In no 
event shall V.P.I. be liable for any sum in excess of the price received for the goods for which liability is claimed.

There are no representations or warranties which have been authorized to the buyer of the turf equipment other than set forth in 
this warranty. Any and all statements or representations made by any seller of this equipment, including those set forth in any sales 
literature or made orally by any sales representative, are superseded by the terms of this warranty. Any affi rmation of fact or promise 
made by V.P.I. or any of its representatives to the buyer which relates to the goods that are the subject to this warranty shall not be 
regarded as part of the basis of the bargain and shall not be deemed to create any express warranty that such goods shall conform 
to the affi rmation or promise.

No employee, distributor, or representative is authorized to change the foregoing warranties in any way or grant any other warranty 
on behalf of V.P.I.

Some states do not allow limitations on how long an implied warranty lasts or allow the exclusion on limitation of incidental or 
consequential damages, so the above limitation or exclusion may not apply to you.

This warranty gives you specifi c legal rights, and you may also have other rights which vary from state to state.

This warranty applies to all Ventrac turf equipment sold in the United States and Canada.

Summary of Contents for LA162


























Reviews: