manualshive.com logo in svg

Ventrac LA162, Operator'S Manual & Parts Drawings

Share
Download
Ventrac LA162 Operator'S Manual & Parts Drawings Download Page 17

Specifi cations - 17

Dimensions

Overall Height  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  22 inches (56 cm)

Overall Length .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .46 inches (117 cm)

Overall Width   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  28 inches (71 cm)

Weight .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   137 pounds (62 kg)

Fan Diameter   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  14 inches (35.5 cm)

Fan Width  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 4 inches (10 cm)

Discharge Opening   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  4-1/2 x 7-1/2 inches (11.5 x 19 cm)

Features

Blower Design .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .Vertical Shaft

Blower Rotation  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  180 degrees

Blower Rotational Control  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  Hydraulic Motor

Fan   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  16 Blade, Welded

Gauge Wheels .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  3 inches (7.5 cm) OD x 3-1/2 inches (9 cm) long

Wind Speed  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  160 MPH (257 km/h) at discharge opening

SPECIFICATIONS

Summary of Contents for LA162


























Reviews:

No comments

Brands by name

Popular brands

Load more brands