manualshive.com logo in svg

Ventrac KW450, Operator'S Manual & Parts Drawings

Share
Download
Ventrac KW450 Operator'S Manual & Parts Drawings Download Page 24

WEATHER CAB SETUP INSTRUCTIONS

Setup - 24

53. Lift the weather cab and position it over the 

power unit.

54. 

Use only the KW450 lift sling attached at all four 

lift points to lift the cab.

Never walk or stand beneath cab when it is raised  

off the ground.

Lower the cab onto the  

power unit. Insert a 1/2 

x 3” bolt into the cab 

mount brackets and 

guide into the rear cab 

mount isolators.

55. Raise or lower the 

weather cab until the 

front cab supports align 

with the cab mounting 

holes (cab supports 

mount on the inside). 

Install 4) 1/4 x 1-1/4” step bolts (Z) and fasten 

with 1/4” flange nuts. Do not tighten.

Z

56. Lower the weather cab until the rear cab mount 

brackets are resting on the rear cab mount isola-

tors. Install a 3/16” thick, notched washer onto the 

1/2” bolt on the bottom side of each cab mount 

isolator and fasten with a 1/2” locking flange nut. 

57. Tighten the hardware for the front cab supports 

to the cab, the front cab supports to the cab front 

mounts, and the cab to the cab rear mounts.

58. Install the fuel tank 

cover by sliding 

the flanges down 

inside the mount-

ing flanges on the 

cab. Press the fuel 

tank cover down 

far enough to seal 

against the top of 

the fuel tank. 

Install 2) 1/4 x 1/2” 

button head bolts 

through the front 

mounting flange 

and the front of the fuel tank cover. Fasten with 

1/4” flange nuts. Install 2) 1/4 x 1/2” button head 

bolts through the rear holes on the fuel tank 

cover and through the rear mounting flange. 

Fasten with 1/4” flange nuts.

59. Install the door onto the cab by placing the hinge 

pivots over the hinge pins on the cab.

Summary of Contents for KW450




















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands