OPERATIONAL CONTROLS
Operation - 31
Front Hitch Valve (HH)
The front hitch valve is
1
2
used to control the lowering
of the front hitch. Turning
the knob on the front hitch
valve counterclockwise (1) increases the speed at
which the front hitch and attachment can be lowered.
Turning the knob clockwise (2) decreases the speed at
which the front hitch and attachment can be lowered.
The front hitch and attachment can be locked in any
position, so that it will not lower, by turning the front
hitch valve knob clockwise until it is completely closed.
When operating 3 point hitch implements, it may be
helpful to lock the front hitch and attachment in a
raised position, to prevent accidental lowering of the
front attachment.
Foot Pedal (II)
The foot pedal works in conjunction with the SDLA
control lever and can be used to control the speed
and direction of the power unit when the operator’s
hand is removed from the SDLA lever.
Press down on the front portion of the foot pedal to
move the power unit in the forward direction. Press
down on the rear portion of the foot pedal to move in
the reverse direction. Changing the amount the foot
pedal is depressed will change the ground speed of
the power unit.
To slow or stop the power unit, press down on the
opposite end of the foot pedal (i.e. if you are travelling
forward, press down on the rear of the foot pedal).
3 Point Hitch & Rear Auxiliary Control
Handles (JJ, KK, and LL)
1. 3 Point Hitch Lift
2. 3 Point Hitch Hold
3. 3 Point Hitch Lower
4. 3 Point Hitch Float
5. Left Auxiliary Hyd. Couplers
Direction #1
6. Left Auxiliary Hyd. Couplers
Hold
7. Left Auxiliary Hyd. Couplers
Direction #2
8. Left Auxiliary Hyd. Couplers
Float (if equipped)
9. Right Auxiliary Hyd. Couplers
Direction #1
10. Right Auxiliary Hyd. Couplers
Hold
11. Right Auxiliary Hyd. Couplers
Direction #2
12. Right Auxiliary Hyd. Couplers
Float (if equipped)
4
3
2
1
5
6
7
8
9
10
11
12
The left control handle (JJ) controls the position of the
3 point hitch arms. Pull back on the handle to raise
the 3 point hitch arms. Push the handle forward to
lower the 3 point hitch arms. Float position is attained
by pushing the handle forward until the float detent
locks the handle in place.
The middle control handle (KK) controls the left rear
set of hydraulic quick couplers. Pull back on the
handle to activate the attachment hydraulic cylinder
in direction #1. Push the handle forward to activate
the attachment hydraulic cylinder in direction #2.
The right control handle (LL) controls the right rear set
of hydraulic quick couplers. Pull back on the handle to
activate the attachment hydraulic cylinder in direction
#1. Push the handle forward to activate the attach-
ment hydraulic cylinder in direction #2.
https://www.tractormanualpdf.info/
