HEI240 Wood Insert Fireplace Installation and Operation Manual
45
Once the faceplate is assembled, align
the notches, located at the top of each
side of the faceplate opening, with the
top of the insert and slide the assembly
toward the front of the insert.
Center the insert into the fireplace
opening. Adjust its height using the
leveling bolts on each side of the
convection air jacket box until the
faceplate is properly seated on the floor
of the hearth extension.
Then install one faceplate retainer spring
on each side of the faceplate and attach
the other end of the spring to the brackets
on the left and right sides of the insert as
shown in
DETAIL A.
Push the faceplate
against the fireplace’s front.
