CLOCK
Goes to the next setting (minutes, then finally
selection of day)
Leave the thermostat for 10 seconds and all adjustments will be
saved. Press ON/OFF button to cancel.
6.5. Setting the timer
If you want the thermostat active at certain timeframe each day
you can use the timer function. Press and hold UP and CLOCK
buttons simultaneously for 5 seconds to enter timer setup:
First, startup time is defined. Use UP and DOWN buttons to
adjust blinking value, and use CLOCK button to jump to next
value. After startup time is defined, end-time is defined. Leave
all buttons for 10 seconds and settings will be saved. The
thermostat will now switch on during the defined interval, at
17
Summary of Contents for VAUFHTC
Page 1: ......
