Vent-a-Hood Air Recovery System Owner And Maintenance Manual Download Page 12

Page: 12 / 12

Page 12

L026

Vent-A-Hood

warrants to the original consumer-purchaser its

products to be free of defects in material and workmanship for a

period of one year from the date of purchase with the following

limitations:

Light bulbs

Freight damage

Damage caused by faulty installation

Incidental or consequential damage

Commercial application

Misapplication or modification of or to any part of the

Vent-A-Hood

product

Warranty

To make a warranty claim, contact the dealer where the hood was

purchased. They will contact the appropriate service agents. It is not

necessary to register the product directly with Vent-A-Hood

Service

Vent-A-Hood Ltd.

P.O. Box 830426

Richardson, TX 75083-0426

(972) 235-5201

www.VentAHood.com

[email protected]

Summary of Contents for Air Recovery System













Search results

Summary of Contents for Air Recovery System

Reviews:

Related manuals for Air Recovery System

Brands by name

Popular brands

Vent-a-Hood Air Recovery System, Owner And Maintenance Manual

Search results

Summary of Contents for Air Recovery System

Reviews:

Related manuals for Air Recovery System

Brands by name

Popular brands