background image

Electric TV Lift, TS700B & TS1000B 

 

2

1. Important safety Instructions. 
 

 
 
 
 
 
 
 
 

 

 

 
Use the following safety guidelines to help protect your lift from potential damage and to en-
sure your own personal safety. 
 

  Read all the installation instructions before testing or installing your lift. 

 

  Read and follow all safety instructions. 

 

  Keep remote control out of reach of children. 

 

  To prevent bodily injury keep hands and clothing away from the lift while the lift is in 

operation. 

 

  Before installing the lift or working with its connections, unplug the lift from the electri-

cal shock. 

 

  Do not install the lift, power supply or R.F. module in places subject to extreme tem-

peratures for example near a radiator, or heating vent.  

 

  The TV lift must only be mounted in a dry area and it must ensured before use that 

the lift is safe or protected from liquid contact or spillage. 

 

  To avoid damaging the power supply, R.F. module and power cord, do not put any-

thing on it or place it where it could become damaged. 

 

  Unplug the lift in the following conditions: 

ƒ

  When the power cord or plug is damaged or frayed. 

ƒ

  If liquid has spilled into the lift, power supply or RF module.  

ƒ

  If the lift, power supply or RF module has been exposed to rain or wa-

ter.  

ƒ

  If the lift exhibits a distinct change in performance, indicating a need 

for servicing.  

 

  MANUFACTURES who build this Flat Lift into other products or use it with other 

products, MUST make sure to prevent bodily injury. The MANUFACTURER is re-
sponsible to give the end user proper warnings and instructions for use. 

 

CAUTION: Before you begin any of the Installation procedures (4. Installation.), 
read and follow the warnings and safety instructions on this page. 

WARNING ! THIS IS NOT A TOY ! 

WARNING ! CHILDREN SHOULD NOT OPERATE LIFT OR 

REMOTE CONTROL ! 

Summary of Contents for TS1000B











Reviews: