ENGLISH
Twin Rechargeable Battery Packs
For use with Xbox One®
Model number: VS2850/VS2860
User Guide
Contents:
2 x Rechargeable Battery Packs (700 mAh NimH)
1 x USB Charging Cable
The Rechargeable Battery Packs are fully compatible with the
Official Standard & Elite Controllers.
Installation & Use
1. Start by removing the battery pack cover on your Xbox One
controller along with any batteries.
2. Carefully insert the Venom Rechargeable Battery Pack into
the back of your Xbox One controller, ensuring it clicks into
place.
3. Using the charging cable supplied plug the mini USB
adaptor into the Rechargeable Battery Pack and the USB
adaptor into any spare port on your Xbox One system.
4. Then turn on your Xbox One system.
5. When charging, the LED light on the Rechargeable Battery
Pack will flash green continuously, once fully charged it will
become solid green.
6. You can use your Xbox One controller and system whilst the
Twin Rechargeable Battery Pack is charging.
Notes
• Charge the battery pack fully before first use.
• Only charge the battery pack whilst inserted into the Xbox
One controller.
• If the Battery Pack is completely run down, charge it for at
least 20 minutes before using your Xbox One controller.
• Only charge using the Xbox One USB port. Do not charge via
an alternative USB port.
• Do not touch the battery pack terminals.
• Do not short circuit.
• Do not dispose of the battery pack in fire or leave near a heat
source such as a radiator.
• Never charge devices on bedding or insulating materials or
they may overheat.
Battery Information
Your device is powered by a rechargeable battery. The full
performance of a new battery is achieved only after two
or three complete charge and discharge cycles. Do not
leave a fully charged battery connected to a charger, since
overcharging may shorten its lifetime. Do not dispose of
batteries in a fire as they may explode. Please dispose of
batteries according to local regulations and recycle where
possible. Do not dispose as household waste.
Care & Maintenance
Your device is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will
help you to protect your warranty coverage:
• Keep your device out of the reach of small children.
• Keep the device dry. Precipitation, humidity and all types
of liquid or moisture can contain minerals that will corrode
electronic circuits. If your device does get wet, allow it to dry
completely.
• Do not use or store the device in dusty, dirty areas as moving
parts and electronic components of your device can be
damaged.
• Do not use or store the device in hot areas. High
temperatures can shorten the life of electronic devices,
damage batteries and warp or melt certain plastics.
• Do not use or store the device in cold areas. When the device
returns to its normal temperature, moisture can form inside
the device and damage electronic circuit boards.
• Do not short circuit the battery.
• Do not drop, knock or shake the device. Rough handling can
break internal circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents or strong
detergents to clean the device. All of the previous
suggestions apply equally to your device, battery, charger or
any enhancements.
• When unplugging devices, always grip by the plug and never
pull the lead.
• When charging your device, never leave the device resting
on the plug as this may strain the connections.
