background image

2

Table of Contents

1.

S

ERVICE

..............................................................................................................4

1.1 3-D Drawing ..................................................................................................4
1.2 Parts Ordering Chart ....................................................................................5
1.3 Technical Support ..........................................................................................5

2.

S

IZING

..................................................................................................................6

3.

U

NIT

T

YPE

& D

EFROST

S

ETTING VS

G

EOGRAPHICAL

L

OCATION

....................7

4.

T

ECHNICAL

D

ATA

................................................................................................8

4.1 Air Distribution (Normal Operation) ..............................................................8
4.2 Air Distribution (Defrost and/or Filtration Mode) ............................................8
4.3 Defrost Cycles Tables ....................................................................................8
4.4 Dimensions ....................................................................................................9
4.5 Controls and Link Options ............................................................................9
4.6 Specifications ................................................................................................9

5.

T

YPICAL

I

NSTALLATIONS

....................................................................................10

5.1 Fully Ducted System ..................................................................................10
5.2 Exhaust Ducted System 

(Source Point Ventilation) ....................................10

5.3 Simplified 

(Volume Ventilation) ....................................................................10

6.

I

NSTALLATION

................................................................................................11-16

6.1 Locating and Mounting the Unit ..................................................................11
6.2 Planning of the Ductwork ............................................................................11
6.3 Calculating the Duct Size ............................................................................12

6.3.1 Example Calculation..........................................................................12
6.3.2 Example of a Design for a Fully Ducted System ..............................12

6.4 Installing the Ductwork and Registers....................................................13-14

6.4.1  Fully Ducted System ........................................................................13
6.4.2 Exhaust Ducted System 

(Source Point Ventilation) ..........................13

6.4.3 Simplified Installation 

(Volume Ventilation)........................................14

6.5 Connecting the Duct to the Unit ..................................................................15
6.6 Installing the Exterior Hoods ......................................................................16
6.7 Connecting the Drain (Solo only) ................................................................16

7.

C

ONTROL

D

EVICES

......................................................................................17-18

7.1 Main Controls ..............................................................................................17
7.2 Optional Controls ........................................................................................17
7.3 Other Features ............................................................................................18

Summary of Contents for Duo 1.2





























Reviews: