- 8 -
5.
CHOOSE THE OPENING (
ALL MODELS
)
Turn the hood over and remove the appropriate knock-out hole according to the type of discharge
chosen.
CAUTION
Never use a hammer and a screwdriver to remove the vertical or horizontal
discharge knock-out, because this would damage the hood internal parts.
Using long nose pliers,
remove the knock-out for the
chosen opening (vertical on
top or horizontal at the back
of the hood).
See illustrations at right.
1
2
1
2
HR006
8
V
ERTICAL
DISCHARGE
:
H
ORIZONTAL
DISCHARGE
:
1.
Using a Robertson or a
Phillips no. 2 screwdriver,
remove the 4 electrical
compartment cover
retaining screws. Set
cover and screws aside.
6. BLOWER REMOVAL (
HORIZONTAL DISCHARGE ONLY
)
The CC700 Series range hoods are factory shipped with the blower mounted for a vertical discharge
configuration. For a horizontal discharge configuration, disassemble the blower from the inner top of
the hood by following the steps below. It will be assembled to the inner back of the hood once the
hood is mounted on the wall.
HD0428
S
CREW
L
OCATIONS