If the legs are not used and the cooker is mounted onto a plinth, fit transit legs to allow for
clearance.
Once legs are adjusted to a nomina
l
cooker height of 91
0
mm, fit the anti
-
tilt restraint
bracket.
1. Fit
the
flat strap to
the
rear at the centre point on
the
lower edge using
the
supplied screw
.
2. Mark
the
centre position of the cooker install
ation
position on
the
floor
.
3. Measure from
the
rear most point
of the
hob to
the
mount point of strap. (Dimension A),
then using
Dimension A mark
the
back edge of the bracket on
the
centre line.
Use
the
bracket to mark
the
fixing point.
4. Fix
the
restraint bracket to
the
floor at
the
position marked. Use
a
suitable fixing
method
.
Note: For
a
concrete floor, use
the
anchor provided. For other construction
s
use a suitable
fastener.
