background image

 
 
 
 
 
     
     
 
 
 
 
     

Dear Customer, 

   
Congratulations on purchasing your new product from Think Appliances.   
 
To register your parts and labour warranty (some conditions apply please refer to your 
warranty card for more details) please contact out Customer Care team on: 
 
 

 

 

 

 

  1800 444 357 

 
Our Customer Care centre is there to ensure you get the most out of your appliance.  For 
example, should you want to learn more about recommended cooking temperatures, the 
various cooking functions available, how to set and program your LED clock, and importantly 
taking care of your appliance when cleaning, please call us because we are here to help you. 
 
It is important that you read through the following use and care manual thoroughly to 
familiarize yourself with the installation and operation requirements of your appliance to 
ensure optimum performance.   
 
We also carry a complete range of spare parts for all Think products. For all your spare parts 
enquiries please contact our team at Pronto Parts on: 
 

  1300 306 973  

 
Again, thank you for choosing an appliance brought to you by Think Appliances and we look 
forward to being of service to you.  
 
 
Kind regards 
 

Management 

 

 

 

 

Think Appliances 

Summary of Contents for V3G1WC6

















Reviews: