VG HCR 3000
6
OPERATION
Only use the appliance to straighten dry hair; never use it on wet hair, synthetic hair or
wigs.
•
Plug in the appliance and switch it on by sliding the on/off switch upwards.
•
Turn the temperature adjustment ring to the desired temperature. Then indicator will
flash until the appliance reaches it.
•
Position the appliance as closely as possible to the roots and take a hair section of
approximately 3-5cm wide.
•
Wrap gently the section around the brush.
•
Curl under the heat for between 5 and 10 seconds depending on your hair strength.
•
Release the section by untangling the section of hair out of the brush.
•
When you are finished, slide down the on/off switch to switch off the appliance.
•
Unplug the appliance after use and let it cool down.
Notes :
−
For an optimal result, use the hair curler on clean, dry and tangle-free hair.
−
The ceramic curling tip reaches a high temperature during use. Do not touch it and
avoid contact with the skin.
−
If you have thin or fragile hair, choosing a too high temperature could damage or
even burn your hair.
CLEANING AND CARE
•
Unplug the appliance and wait until it has fully cooled down before cleaning or
storing it.
•
To clean the body of the unit, use a soft dry cloth.
•
Never use detergents or abrasive products.
•
Never hang the product by the cord.
•
Never wrap the cord lightly around the appliance.
•
Never immerse the appliance in water or any other liquid.
Summary of Contents for VG HCR 3000
Page 2: ...VG HCR 3000 2...
