EN
30
After Use
Once you have finished use, the air must be removed from the leg cuffs.
1. Set the pressure control to the highest level.
2.
Switch off the device by pressing the On / Off button. The control lamp goes out.
3. Unplug the air-tube connection plug from the top socket on the control unit.
4. Now connect the plug for the air tubes to the con-
nection on the side of the control unit.
5.
Switch on the device by pressing the On / Off but
-
ton. The On / Off control lamp lights up as soon as
the device is turned on. The air is now pumped out
of the leg cuffs.
6. Once the air has been pumped out, open the zip
and remove the leg cuffs.
7.
Switch off the device by pressing the On / Off but
-
ton.
8. If you used the mains adapter, unplug it from both
the mains socket and the device.
Cleaning and Care
CAUTION!
■
Keep the device in a place which is protected from direct sunlight and extreme tem-
perature fluctuations.
■
Do not use any caustic or abrasive cleaning agents to clean the device. These could
damage the device.
•
Before cleaning, always remove the air tubes from the leg cuffs and from the control
unit.
•
The leg cuffs can be cleaned with a slightly damp cloth and some household deter
-
gent. If the leg cuffs are used for more than one person and if they come into direct
contact with the skin, you should disinfect the cuffs with a standard disinfectant to
avoid cross contamination.
It is imperative that you make sure that no moisture
enters the air inlet and outlet openings.
• When used for a long time, the ends of the tubes may expand and air could leak out.
In such case, you can cut off a short piece of the ends.
•
Only lightly fold the cuffs together. Bending the cuffs with too much force can lead
to cracks.
• We recommend that you only clean the control unit when it is absolutely necessary!
Clean the control unit with a slightly damp cloth and, if necessary, a little household
detergent.
06019_de-en-fr-nl-it_A5_V2.indb 30
06019_de-en-fr-nl-it_A5_V2.indb 30
15.04.2021 15:21:56
15.04.2021 15:21:56
