Vendors Exchange CURVE AP 113, Installation Manual

Page: 17 / 36

REMO
VE OEM DOOR
INS
TALL DOOR
HARNESSES
INS
TALL BUCKET
FINAL INS
TALL
ADJUS
T DOOR
17
REMOVE OEM DOOR, PREPARE FOR CURVE DOOR
CURVE™ Door AP 113, AP 123, AP 7000
REMO
VE OEM DOOR
INS
TALL DOOR
FINAL INS
TALL
ADJUS
T DOOR
For AP 113 and AP 123 , loosen the top screw only of
the ballast filler panel on the inside of the machine to
access top bracket fastener.
Then, for the AP 113 , and AP 123 from inside the machine
cabinet, loosen all the inner panel screws (see arrows) and
set aside for “Install Curve Door”, Step 7 on page 20 . (2)
screws are shown in the image on the left, then remove pan-
el from the cabinet. No inner panel exists for the AP 7000 .
Align Top Hinge Shim Plate (VED3584) as shown in
image (A). Insert upper hinge stud (circular impression on
hinge) in hole on door and align threaded hole with hole
on shim and door as shown in image (B).
INSTALLATION GUIDE
11
THIS SECTION IS COMPLETE,
MOVE ON TO NEXT SECTION
INS
TALL BUCKET
HARNESSES
R
Overview
R
To TOC
Threaded Hole
Hole in Door
Inner Panel
10
Ballast Filler Panel
9
AP 113, AP 123
AP 113, AP 123
Top Shim Plate
A
Upper Hinge Stud