30
CURVE™ Door AP 113, AP 123, AP 7000
COMPLETE INSTALLATION
Then, hold header firmly on the top of the door with one
hand. Next, using a Phillips head screwdriver, tighten
Screw (VE1963)
as shown.
Next, check that the header is aligned flush with
the vertical trim on the hinge (left) side of the door.
Then, hold header firmly and tighten Phillips head
screw and hex nut to a snug fit.
Then, ensure no gap exists between installed header and
vertical trim. If a gap is present. Loosen nut and Phillips screw
from top hinge side of door, adjust header accordingly, and
then re-tighten the fasteners.
Finally, for
AP 113
and
AP 123
not equipped with the 7th Tray™ option, attach
Block Out Plate (VED3596)
by fastening brackets
into existing holes on left (A) and right (B) side of the cabinet under the last tray with
Self-Tap screws (VE7373K)
. Installed block out
plate is shown in image (C).
INSTALLATION GUIDE
9
10
AP 113, AP 123
11
8
B
C
A
(Continued next page)
Block Out
Plate
Block Out
Plate
Last Tray in
Cabinet
Vertical Trim
Header
Self-Tap
Screws
Self-Tap
Screws
Screw
Header
REMO
VE OEM DOOR
INS
TALL DOOR
HARNESSES
INS
TALL BUCKET
FINAL INS
TALL
ADJUS
T DOOR