8
4.A)
Close door and ensure the
t-handle operates smoothly, it
should engage the door catches
easily and without excessive
force. Adjust door catches in
cabinet, if necessary.
4.B)
Secure the Coin return motor and mount to the coin mech mounting
bracket.
STEP 4. Reassemble Door
REMO
VE DOOR
INS
TALL DOOR
INS
TALL DROP SENSOR
ATT
A
CH HARNESSES
INSTALL NEW DOOR
INSTALL DROP SENSOR
1.A)
Remove screws from OEM drop
sensor boards and remove covers.
Retain screws and covers for use
with new sensors.
Unplug OEM drop sensor boards,
and dispose of the boards and
harnessing.
1.B)
Mount new DROP SENSOR
RECEIVER BOARD (
VE1017053
)
on payment side and DROP
SENSOR TRANSMITTER BOARD
(
VE1015055
) to left side bucket
using the retained screws and
covers.
1.C)
Attach DROP SENSOR HARNESS
(
VE6877
) that runs between the
drop sensor boards.
1.D)
Attach DROP SENSOR HARNESS
FOR UCB (
VE1018279
) and route
behind slide and then to UCB as
shown.
PAYMENT SIDE
LEFT SIDE
VE1021148 - Media Panel Installation Manual
www.veii.com