10
2.B)
Wrap the loose end of the ground
wire around the preexisting bundle.
Feel free to use cable ties if
Preferred.
2.C)
Place the open end of the ground
wire over the stud indicated above.
Using a nut secure the ground wire
in place.
2.A
) Using a screw , secure one end
of the ground wire to the cabinet.
Position the screw towards the
back end of the cabinet boss.
Ensure the screw does not
protrude out of the cabinet.
REMO
VE DOOR
INS
TALL DOOR
INS
TALL DROP SENSOR
ATT
A
CH HARNESSES
ATTACH HARNESSES
1.I)
Connect VENTURE DATA HARNESS (
VE1019771
) to venture board and UCB.
1.K)
Connect P-CLAMP (
VE4684
) to door slide. Route harnessing as shown and secure with cable ties in locations specified
in the following pictures.
1.J)
Secure loose wires with CABLE TIES
(
VE4601K
).
*Proceed to the next two pages for UCB & Venture Harnessing Diagrams*
VE1021148 - Media Panel Installation Manual
www.veii.com
Ground Wire
STEP 2. Attach Ground Wire