Vendor KAMN-23 Owner'S Manual Download Page 8

 

Limited Warranty 

 

This warrants to the original purchaser that this product is free from defects in material and 
workmanship as of the date of purchase and that it will, under normal use and proper care, remain so 
for one year from the date of purchase. Missing or initially defective parts will be replaced free of 
charge during the period of this limited warranty.  The original dated sales receipt is required for all 
warranty claims. This warranty does not cover damage which has occurred during transport from the 
point of purchase to the consumer’s home. This warranty does not cover glass, bulbs, remote 
controls, or batteries.  

 

This product is for

 

residential use only

.  Any and all commercial use of this product voids all 

warranties, and frees the manufacturer from all liability. The following will void this warranty: Damage 
caused from tampering with, modifying, or altering the fireplace insert in any manner; Damage due to 
incorrect assembly, improper care, misuse, or abuse; Damage from being used with the wrong power 
source; Water damage; Damage caused from this insert being used outdoors; Damage caused from 
this insert being used for excessive periods of time; Damage caused by the insert being used in a 
commercial application; Damage from use as a primary heat source; Other misuse or abuse not 
specifically listed herein.  

 

This product is not intended to be used as a primary heat source. 

 

VENDOR DEVELOPMENT GROUP, INC.(HEREAFTER, VDG), ITS DIRECTORS, OFFICERS, OR 
AGENTS, WILL NOT BE LIABLE TO THE PURCHASER OR ANY THIRD PARTY, WHETHER IN 
CONTRACT, IN TORT, OR ON ANY OTHER BASIS, FOR ANY INDIRECT, SPECIAL, PUNITIVE, 
EXEMPLARY, CONSEQUENTIAL, OR INCIDENTAL LOSS, COST, OR DAMAGE ARISING OUT OF 
OR IN CONNECTION WITH THE SALE, MAINTENANCE, USE, OR INABILITY TO USE THIS 
PRODUCT, EVEN IF VDG, OR ITS DIRECTORS, OFFICERS, OR AGENTS HAVE BEEN ADVISED 
OF THE POSSIBILITY OF SUCH LOSSES, COSTS OR DAMAGES, OR IF SUCH LOSSES, COSTS, 
OR DAMAGES ARE FORESEEABLE. IN NO EVENT WILL VDG, OR ITS OFFICERS, DIRECTORS, 
OR AGENTS BE LIABLE FOR ANY DIRECT LOSSES, COSTS, OR DAMAGES THAT EXCEED 
THE PRODUCT PURCHASE PRICE.  

 

Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so 
the above limitation or exclusion may not apply to the purchaser. This limited warranty gives you 
specific legal rights, and you may also have other rights which vary from jurisdiction to jurisdiction.   

 

 

Thank you for purchasing this Electric Fireplace!  If you need assistance with assembly, have 

questions about the use of this product, or have missing or defective parts, please e-mail us at: 

 

[email protected] 

 

Or, call us toll-free (M-F 8:30AM-4:30 PM CST) at 

1-866-561-0731 

 

Vendor Development Group, Inc. 

Minneapolis, MN 55401 

Made in China 

 

 

 

Meijer.com

Summary of Contents for KAMN-23









Reviews: