Vendor KAMN-23, Owner'S Manual, Page: 4 / 8

4
PREPARATION
A complete electric fireplace heater should consist of two parts; the wooden mantle and the
fireplace heater. Each is packed in a separate carton. Always use the fireplace heater with the
wooden mantle.
Remove all parts from the carton and place them on a clean, soft, and dry surface. Check the parts
list to make sure nothing is missing. Dispose of all packaging materials properly. Please recycle.
FIREPLACE PARTS & HARDWARE
Fireplace Insert not shown
1 Mantel top 1
2 Side panels (2L / 2R) 2
3 Rear panels (3L / 3R) 2
4 Shelf 1
5 Hearth 1
6 Cross panel 1
A Bolts 19
B Washers 19
C Wood dowels 23
D Wood screws 15
E Long wood screws 4
F Short wood screws 4
G Bracket 4
H Strap 2
See Insert Manual for insert
installation instructions &
important safety information.
Note: A Phillips screwdriver is required for some assembly steps, but is not included.
3L
2L
2R
3R
Meijer.com