Vendo V-MAX 576, Parts And Service Manual

Page: 6 / 138

A COMMITMENT TO SAFETY
The Vendo Company is committed to safety in every aspect of our product design. Vendo
is committed to alerting every user to the possible dangers involved in improper handling
or maintenance of our equipment. The servicing of any electrical or mechanical device
involves
potential hazards , both to those servicing the equipment and to users of the
equipment. These hazards can arise because of improper maintenance techniques. The
purpose of this manual is to alert everyone servicing Vendo equipment of potentially
hazardous areas, and to provide
basic safety guidelines for proper maintenance.
This manual contains various
warnings that should be carefully read to minimize the risk
of personal injury to service personnel. This manual also contains service information to
insure that proper methods are followed to avoid damaging the vendor or making it unsafe.
It is also important to understand these
warnings are not exhaustive. Vendo could not
possibly know, evaluate, or advise of all of the conceivable ways in which service might be
done. Nor can Vendo predict all of the possible hazardous results. The safety
precautions outlined in this manual provide the basis for an effective safety program. Use
these precautions, along with the service manual, when installing or servicing the vendor.
We strongly recommend a similar commitment to safety by every servicing organization.
Only
properly-trained personnel should have access to the interior of the machine.
This will minimize the potential hazards that are inherent in electrical and mechanical
devices. Vendo has no control over the machine once it leaves the premises. It is the
owner or lessor’s responsibility to maintain the vendor in a safe condition. See Section I of
this manual for proper installation procedures and refer to the appropriate service manual
for recommended maintenance procedures. If you have any questions, please contact the
Technical Services Department of the Vendo office nearest you.
SAFETY RULES
•
Read the Safety Manual before installation or service.
•
Test for proper grounding before installing to reduce the risk of electrical shock and
fire.
•
Turn off power switch or disconnect power cord from wall outlet before servicing or
clearing product jams. The vending mechanism can trap and pinch hands.
•
Use only fully-trained service technicians for Power- On servicing.
•
Remove any product prior to moving a vendor.
•
Use adequate equipment when moving a vendor.
•
Always wear eye protection, and protect your hands, face, and body when working
near the refrigeration system.
•
Use only authorized replacement parts.
•
Be aware of inherent dangers in rocking or tipping a vending machine.
•
Always turn power off before plugging or unplugging vendor to wall outlet.
3/2002
S-2