Instructions for programming SVE01 Board
functions
14
© SandenVendo Europe SpA
4 PROGRAMMING
To enter the programming menu, open the vending machine and push the button that is on
the SVE01 board. ( See figure)
Once you press the Program button the display will show the programming menu.
In programming mode, you have access to a variety of information that allow you to
change the configuration of the distributor.
The selection buttons assume in programming mode the functions described on page 11.
After entering programming mode, the operator can select the following submenus:
00 Historical Error
01 Tubes Payout
02 Tubes Fill
03 Cash counter
04 Sale counter
05 Coin Price
06 Key 1 Price
07 Key 2 Price
09 Audit Usb
10 Test
11 Tecnician menu
12 EVA Counters
To enter in the "11 Tecnician menu", you must digit the Password:
4
–
2
–
3
–
1
The password in that menu, is necessary to avoid that non authorized users can program
or modify the setting of the vending machine.
0 General Menu
00 Historical Error
01 Tubes Payout
