Vendlet 6300000, Manual

Page: 8 / 40

PART 1 - General information
8
How VENDLET Standard works
VENDLET Standard is switched on by double-clicking the
on the hand control. VENDLET Standard produce a “beep”
upon activation and the green diode over the power symbol
turns on.
When VENDLET Standard hasn’t been used for 90 seconds, the
system produces a “beep-beep” sound, the diode turns off,
and then VENDLET Standard is turned off.
When VENDLET Standard is turned on, the bars can be turned
in both directions or raised or lowered. The colour coding on
the bars relates to the colours on the hand control buttons.
The speed of the bars can be reduced to 75% or 50% of normal
speed.
Press and hold the individual buttons long enough to obtain
the desired operation; the motors will stop when the button
is released. Likewise, you may stop an activated function by
clicking the .
The emergency release nut must only be used in case of emer-
gency (see page 21) or malfunction of the actuators.
VENDLET Standard hand control
Power with light /
stop button
Tighten the sheet
on the red bar
Slacken the sheet
on the red bar
Raise the red bar
Lower the red bar
Speed Adjustment
Tighten the sheet
on the blue bar
Slacken the sheet
on the blue bar
Raise the blue bar
Lower the blue bar
Flash light
Red corner post
with build-in actuator
Head end
Red corner post
with build-in actuator
Foot end
Blue corner post
with build-in actuator
Head end
Blue corner post
with build-in actuator
Foot end
Turning sheet
Blue bar
Red bar
VENDLET Standard
Emergency
release nut
Height
adjustment
Reset*
* If the hand control is flashing, reset the system by simultaneously press -
ing the two top buttons on the hand control. You will hear 10 rhythmic
beeps. Press and hold the buttons until the beeping stops.
Watch vidoes on how the hand control works
on our webpage www.vendlet.com
or scan the QR-koden.