41
SA - HIDRÁULICA Super Série
TRANSPORT ON TRUCK OR TRAILER
On trucks or trailers use adequate ramps to load or unload the seeder. Do not carry
out these operations in unplanned ravines. It may take serious accidents.
When using the hoists, use the adequate points to the lifting.
To support correctly the seeder use the stands and lock the seeder wheels.
Moorings (cables, chains, ropes, etc. …) should be used in enough amounts to bring
to a halt the seeder during the transportation.
Check the conditions the load in the first 10 km of transporting and after each 80 to
100 km. Note if the moorings are not loose. In bumpy roads, check the load frequently.
Always be aware to the transporting height, especially in electrical networks and
viaducts, etc...
Check the laws in force on the height and width limits of the load. If necessary use
flags, lights and reflectors to alert other drivers.
The transport over long distances it will be made on trucks or trailers.
TRANSPORT WITH HITCH ON THE TRACTOR’S DRAWBAR.
When transporting the seeder with hitch on the tractor’s drawbar, do it the following
way:
Do not transport the seeder filled.
Note the seeder width in relation to the places narrower, mainly farm gates and roads
with ditches.
For a better preview, the tractor should be travel with the headlights on.
In over long distances the transport do not should be made by tractor.
The transport do not should be made at night.
SAFETY RULES – TRANSPORT
Summary of Contents for SA 7300
Page 1: ...1 SA HIDR ULICA Super S rie...
Page 2: ...2 SA HIDR ULICA Super S rie...
Page 7: ...7 SA HIDR ULICA Super S rie NDICE...
