
22
SA - HIDRÁULICA Super Série
fig. 02
fig. 01
Coupling Seeder – Tractor
Always make the coupling and decoupling of the seeder from the tractor in level and firm
place:
PREPARING
1-
Perform the displacement with the tractor in slow gear in the direction to the seeder and be
always paying special attention to stop the movement of the tractor (to brake).
2-
When approaching to the seeder, use the control lever of the height the hydraulic arms allowing
they be closer the 3-point hitch of the seeder.
3-
Make the coupling of the left lower arm (A) (fig. 01) (not adjustable) placing the pin with safety
lock.
4-
Place the 3
rd
point (B) with the pin and the safety lock.
5-
Make the coupling of the right lower arm (C) (adjustable).
6-
After making coupling the seeder, center it in relation to the half the tractor using the stabilizers
(F) for the alignment of lower arms, checking their distance in relation to the tractor wheeled.
7-
Lift the support feet of the seeder.
IMPORTANT
Check the position the hitch of the 3
rd
point (B) (fig. 01) in the tractor so that the
relief valve (E) does not be driven. Do the attachment of the 3
rd
point (B) in the opposite
position to the relief valve (E) always; so that does not occur worn on the tractor’s hydraulic
system out.
Tractor
It is recommended the use of ballast weights in an
adequate amount for the accomplishment the planting work
with the better efficiency. This amount should be in relation
to the machinery’s weight and slope of the land.
The support foot is in standing position (A) (fig. 02).
It should be used to stand the seeder in flat and firm place.
Lift the support foot until the last hole (B) so that the
seeder is in the transporting position.
Wheat Version
Summary of Contents for SA 7300
Page 1: ...1 SA HIDR ULICA Super S rie...
Page 2: ...2 SA HIDR ULICA Super S rie...
Page 7: ...7 SA HIDR ULICA Super S rie NDICE...