VENCE TUDO SA 7300, Operation Manual

Page: 24 / 59

24
SA - HIDRÁULICA Super Série
fig.03
fig.05 fig.04
Tires Pressure
For a great contact with soil use, an ideal pres -
sure pro the work, so the essential flexibility for the
long durability of the tires will be getting. The use of
low or high pressures may cause serious and irrever -
sible damage to the tires. It is recommended for tires
500/6-12 the pressure of 20 lbs/pol² , according
to the manufacturer for the normal conditions of use.
Lubrication
Be sure that the seeder is lubri -
cated properly. Depending directly on this
procedure is the revenue, conservation
and the productivity of it.
Sets for Planting
Support bars compose these sets, where are
attached the plastic reservoirs with seed distributor
mechanisms kits, horizontal and vertical, and motor
system of set. These sets are attached on the planting
lines.
For planting with 90cm row spacing should
be isolated the unused reservoirs making removal the
distributor discs of the lines.
Adjustment of the Row Spacings ( SUMMER )
PROCEDURES FOR CHANGING OF ROW SPACING:
1 - Make the change of the row spacing in plane, firm and
clean place.
2 - Lift the seeder through the tractor’s hydraulic control.
3 – Remove the spacer bars (A) (fig. 03), loosening the
screws, bushings and washers.
4 – Loose the fixing bolts of the furrower line kit (B) (fig.
04), letting it loose in relation the chassis frame. Move until
the desired spacing.
5 – Loose the rod jointer (C) (fig. 05) through the attaching
nuts of the clamps (D). Align the rods with the furrower line.
Attach the rods jointer and the furrower line kit.
6 – Assemble the spacer bars (A) according to the desired
option.
7 – Loose the nut from fixers of the seed reservoirs (E) (fig.
05) and do the alignment of them in relation to the furrower
lines.