Vemer Mithos Color Wi-Fi, User Manual

Page: 37 / 48

- 35 -
Mithos Wi-fi Chronothermostat User Manual
Choosing the regulation probe
In case an external probe is present, it is possible to choose whether to use
the internal probe or the external one as a regulation sensor.
Field (22) will display the writing
“SnS=”
and on field
(16)
the value
currently set will flash.
Using the
“ ”
and
“ ”
keys,
choose “Int” if you want to use the
internal probe or
“Est”
if you want to
use the external probe and press “ ”
to confirm the choice.
Serial (PIN)
This menu shows the pin code necessary in phase of start-up to associate the
Mithos Wi-Fi to your account.
From here, it’s possible to put the Mithos Wi-Fi in off-line mode or cancel the Mithos
Wi-Fi from your account.
To put the Mithos Wi-Fi in off-line mode,
press the key “ ” . The display shows
LOC
To cancel the Mithos Wi-Fi from your
account press the key “PRG” . The display
shows
DELETE
.
Pressing the keys “ ” or “ ” the mac
address of Mithos Wi-Fi is showed and
the power of the signal (between router
and Mithos Wi-Fi) expressed in Db.