Vemer Mithos Color Wi-Fi, User Manual

Page: 36 / 48

- 34 -
Mithos Wi-fi Chronothermostat User Manual
On field (22) “ESt=” appears and on
field
(16)
the chosen option. Choose
“°C” if you want to connect an external
temperature probe or
“dIG”
if you want
to connect an auxiliary device.
If you choose
“°C”
when you exit the
menu, on field (15) appears “EXT”
followed by the value of temperature
measured by the probe.
The characteristics of the probe are the following:
• Degree of protection: IP66
• Cable length: 2 meters (extensible up to 40 meters with a bipolar cable min
section 1 mm
2
)
• Operating temperature: -40 °C ÷ +60 °C
Code Model Capacity
VN883500 X.Temp -40 °C ÷ +60 °C
External auxiliary input configuration
The programmable thermostat allows to connect a remote external temperature
probe to display (or eventually to adjust) the measured temperature where the
probe is installed or a not powered contact if you want to connect an external
auxiliary device (for example a gas detector, an anti-theft system, a system of boiler
block detection,…).