VEMCO – ASCENT–AR / AR2 Manual
28 July
2018
40
How to Update Firmware Using Manual Procedure
If the automatic notification doesn’t appear, then you can manually update the
firmware. Before beginning, use Step 1 in the previous section to prepare for the
update. Once the preparations are completed, select “Install Firmware” on the
ASCENT-AR tab. A window titled “Select Firmware File” will appear. Select the
most recent firmware file that matches your model of ASCENT-AR. VUE software
will not let you install a firmware file for the incorrect model type. Click the
“Open” button to continue. The rest of the procedure matches the instructions found
in Steps 2 – 5 in the automated notification section.
Wait while the firmware is loaded into the ASCENT. The
status of the update is shown at the bottom of the screen.
Click “OK” when the firmware is installed (see below).
STEP 4
Verify that the Bluetooth Activator is
still in the release, or place it in the
release if it had been removed. This
is important as the ASCENT will
require it to be in place to re-establish
communication during the procedure.
STEP 3
Keep Bluetooth Activator in ASCENT!
