Velp Scientifica F201A0505, Instruction Manual

Page: 8 / 24

8
AL5 Safety relay fault
To remove the error message, disconnect the instrument from the power supply.
If alarm persists on the display, please contact VELP Scientifica technical service department.
service@velp.it
7. Maintenance
8. Technical data
Model
F201A0505
General
features
Power supply
115-230V (+/-10%)
– 50-60 Hz
Dimensions (WxHxD)
90x180x170 mm
(3.54x7.10x6.70 in)
Weight
1,5 kg (3,30 lb)
Power input 300 W
Construction material (structure) Stainless steel
Working in continuous Admitted
Settable restart modality Stop or work
Noisiness << 60 dBa
Environmental temperature admitted
+5…+40 °C
Storage temperature admitted -
10…+60 °C
Max humidity 80%
Overvoltage category II
Pollution degree CEI EN61010-1 2
Max altitude 2000 m
Stirring
Programmable speed range 35-500 rpm *depends to motor selected
Speed selection 1 rpm step
Stirring alarm Motor fault
Torque Max torque admitted 280 Ncm (8,3 A)
Counters Motor counter Working hours
9. Accessories
A00000415
Motor 10 lb*in, 417 rpm, 1/11 HP -24V
A00000416 Motor 28 lb*in, 500 rpm, 1/4 HP -24V
A00000417 Motor 55 lb*in, 250 rpm, 1/4 HP -24V
10. Motor information
Code A00000415 A00000416 A00000417
Description Motore 10 lb*in, 417 rpm, 1/11 HP
-24V Motore 28 lb*in, 500 rpm, 1/4 HP -
24V Motore 55 lb*in, 250 rpm, 1/4 HP -
24V
Torque [N*cm] 113 316 621
Torque [lb*in] 10 28 55
Speed [rpm] 417 500 250
Power supply [V] 24 24 24
Power [W] 68 187 187
Power [HP] 1/11 1/4 1/4
Shaft diameter
[mm]
11 19 19
Shaft lenght [mm] 31,4 42,4 42,4
Fixing informations Datasheet below Datasheet below Datasheet below
Cables lenght [m] 1,5 1,5 1,5
Reactor Volume Up to 25 liters of water Up to 50 liters of water Up to 100 liters of water
Maintenance
➢
No routine or extraordinary maintenance is necessary.
➢
Repairs must be carried out by authorized Velp personnel only.
➢
Instrument must be transported into its original packaging any indications present on the original packaging
must be followed (e.g., palletized).
Cleaning
➢
Disconnect the unit from the power supply and use a cloth with a non-flammable non-aggressive detergent.