7
➢
The rotation direction set has its relative LED lighted on: clockwise (C) and anticlockwise (E)
Torque
➢
The torque indicator bar (B), made by four LEDs, shows the intensity of the torque applied
➢
CONTROLLER Digital model does
n’t show a precise torque value as the Advance model
Lock
➢
Holding the Lock key (H) for
3 seconds it’s possible to lock the control panel
➢
Unlock the control panel by holding key H for 3 seconds
➢
When the instrument is locked LED (I) lights up
4. External Connections
USB
➢
This model has USB connection in the back for software upgrading by PC
5. Menu
Hold the control knob (F) for 3 seconds to enter into the setting mode when stirring is off.
Turning the control knob (F) it is possible to pass from one of the following parameters to the next one. Click the knob to modify:
Click the stirring control knob (F) to display the set value. Turn the knob to set the new value and click to confirm.
To leave settings mode wait 10 seconds without touching any knob or click the lock key.
6. Error messages
When the display shows an error message, the stirring function stops automatically.
Error code
Cause
AL1
Motor doesn’t start stirring
AL2
High internal motor temperature
AL3
Motor overload
AL4
High driver temperature
Parameter shown
on display
Default value
Range
Description
Mot
Mot 1
Mot 1
Mot 2
Mot 3
Type motor:
➢
Mot 1:
A00000415
➢
Mot 2: A00000416
➢
Mot 3: A00000417
NOdE
StOP
StOP - run
Set starting mode:
➢
Stop: when the instrument is switched on through
the main switch, OFF is on display
➢
Run: when the instrument is switched on, it
restarts to work with the last set points set
LINt
500
100
–
500
Set full scale speed:
➢
It limits the maximum value of speed set point
(from 100rpm, step 100rpm)
COun
Running time. Days (24H):
➢
Motor working time is displayed in hours until
9999 hours (around 416 days).
After that,
it’s shown in days starting from 417 and
a dot turns on as following, to differentiate days
from hours “.417”
UPGr
Software upgrading:
➢
It allows to install a new software version
rSEt
nO
YES - nO
Reset:
➢
It allows to restore default setting parameters
