Veloteq Owner Manual 2008 P. 10 of 15 2/18/2008
vice immediately.
Pedal Installation:
Insert the pedals in the pedal insertion holes as shown in the example below. The insertion hole is cut
out at the factory. Take
care to install the pedals cor-
rectly as marked Left and
Right to the pedal arm and
insertion hole. The pedals
are shipped in the rear cargo
carrier. Insert the gray
caps included with the acces-
sories.
Periodic Adjustments and Maintenance:
The newly purchased vehicle from your dealer should be fully set up and tested by skilled personnel for
proper operation. Customer assembly is not recommended. For enquiries, please refer to your dealer.
We recommend a comprehensive inspection or your vehicle every 1000km (650 miles). Lubricate the
front and rear axle, front fork, transmission and chain using a good quality chain lubricant. Check that all
nuts and bolts are securely attached and that the brakes are operating properly.
Avoid flooding in standing water which can severely damage electrical components. Avoid prolonged
exposure to hot sun and rain. For reason of safety avoid riding in heavy rain or downpours.
After prolonged use it is advisable to return to your dealer for complete maintenance and inspection. This
will insure safety of operation on the road and extend the life of your vehicle.
Insure that the chain
and all mechanical parts are properly lubricated at all time. Use a chain lube specifically
formulated for bicycle or motorcycle chains. See the addendum to this manual for periodic
lubrication of the GT gear-reduction, lube injected motor.
