O
WNER
’
S
F
LIGHT
M
ANUAL
63
62
XL
37. Inspect engine mount bolts for condition and torque
38. Inspect engine baffles for cracks and security
39. Inspect engine mount cushions for condition
40. Inspect alternator and belt for condition and security
41. Inspect prop governor for leaks and security
42. Inspect starter for condition and security
43. Inspect starter brushes for wear
44. Inspect starter ring gear for wear and security
45. Safety removed components and reinstall engine cowling
C. Cabin Group
1. Inspect cabin door and windows for cracks and condition
2. Inspect upholstery for tears and condition
3. Inspect seat belts for tears, fraying and security
4. Inspect trim operation and indication
5. Inspect rudder pedals for operation and security
6. Inspect brake operation
7. Inspect brake master cylinder for leaks and condition
8. Service brake master cylinder as required
9. Inspect control stick and wiring for condition
10. Check nav lights, taxi, landing lights, and strobe lights for
condition and operation
11. Inspect all panel instruments for condition and security
and operation
12. Inspect pitot/static system plumbing for condition
13. Inspect, clean or replace vacuum filter
14. Inspect altimeter for security and calibration IAW FAR
91.170
15. Inspect fuel system drain for operation and
contamination
16. Inspect cabin heater controls and ducting for condition
and operation
17. Inspect cabin air vents
18. Inspect all radios and avionics for operation and condition
19. Inspect cabin door latches for operation and condition
5. Inspect and clean the suction screen
6. Replace oil filter and inspect for contamination
7. Inspect oil temp sender unit for leaks and security
8. Inspect oil cooler for leaks and security
9. Service engine with proper quantity of oil
10. Inspect spark plugs for condition, clean and gap
11. Check cylinder compression
#1 /80 #2 /80 #3 /80 #4 /80
#5 /80 #6 /80
12. Inspect cylinders for broken and cracked fins
13. Inspect valve rocker covers for oil leaks
14. Inspect push tube seals for oil leaks
15. Inspect engine accessories for leaks and security
16. Inspect ignition harness for condition
17. Inspect magneto points for gap and condition
18. Inspect magnetos for oil leaks
19. Lubricate breaker felt
20. Inspect distr. block and springs for cracks/security
21. Check magneto to engine timing
22. Inspect magneto switch and “P” leads for operation
23. Inspect air induction system
24. Clean and inspect air filter
25. Inspect fuel injectors for leaks
26. Inspect fuel divider and lines for leaks and security
27. Inspect intake tubes/seals for leaks and condition
28. Inspect flexible fuel lines for condition
29. Inspect fuel control/injector for leaks and security
30. Inspect vent lines and engine breather tube for condition
31. Inspect fuel pump
32. Inspect vacuum pump for operation/security
33. Inspect exhaust stacks, connections and gaskets.
34. Inspect throttle, mixture, prop controls for travel and
rigging
35. Lubricate engine controls
36. Inspect engine mount for cracks and security
Summary of Contents for XL RG
Page 1: ......
