Thank you for choosing a Vello Off-Camera TTL Flash Cord. This
TTL flash cord allows you to set up a portable flash for off-camera
lighting while retaining all of the TTL flash functionality achieved in
modern digital cameras.
Off-camera lighting reduces the harsh shadows of direct on-camera
flash and gives your photos more natural lighting. TTL (through the
lens) functions of modern cameras handle exposure calculations so
you can concentrate on composing the image. Because the light
from the flash is measured through the lens by the camera, there is
no need for exposure calculations or a separate light meter.
INTRODUCTION
2
7
MOUNTING THE OFF-CAMERA FLASH
1. Make certain that the flash
and camera are turned OFF
before mounting the flash.
2. Mount the flash to the hot
shoe of the off-camera flash
sync cord.
3. Turn on the camera and flash.
Refer to the user manuals of
your camera and flash for
instructions on TTL light
metering.
DO NOT EDIT OR REVISE ARTWORK
We will not approve any artwork which has been altered by the vendor
FORWARD YOUR PROOFS
FOR APPROVAL
BEFORE FINAL PRODUCTION
DO NOT BEGIN PRODUCTION
WITHOUT PRIOR APPROVAL OF PROOFS
Switch off all devices (cameras
and flashes) before adding or
removing a flash unit.
Use caution in stretching the
coiled cord. Do not stretch
the cord to lengths where it
will cause your setup to
become unstable.
OFF-CAMERA MOUNTING
6
3
CAUTIONS
1. The off-camera hot shoe of
the sync cord can be
mounted to an accessory
shoe.
2. Or use the 1/4"-20 threaded
socket to mount to a
compatible tripod, boom, or
light stand.
Do not attempt to modify or
disassemble the cord, shoe, or
contacts. Do not attempt to
“daisy-chain” flash cords.
This device is not water-
resistant. Do not immerse in or
expose to water, rain, or snow.
Do not clean the cord with
solvents. Use a soft, dry cloth
to clean the cord and
connections.
Do not use or leave the device
in conditions of extreme heat,
severe cold, or high humidity.
DO NOT EDIT OR REVISE ARTWORK
We will not approve any artwork which has been altered by the vendor
FORWARD YOUR PROOFS
FOR APPROVAL
BEFORE FINAL PRODUCTION
DO NOT BEGIN PRODUCTION
WITHOUT PRIOR APPROVAL OF PROOFS
2
