4
DMX Mode:
Operating through a DMX controller give the user the freedom to create their own programs
tailored to their own individual needs. This function also allows you to use your units as spot lights.
1. This function will allow you to control each individual unit
’
s traits with a standard DMX 512 controller.
2. The unit has 9/24/60 three DMX channels modes
to operate. Please see “DMX channels/function/
description/ value
” for the DMX traits.
3. To run your unit in DMX mode, plug in the unit via the XLR connections to any standard DMX
controller. Set your desired DMX address following the setup specifications that come with your DMX
controller.
Main Control Menu
The control board on the fixture base is your interface to access and
control all functions on the unit, Its digital display gives you a code vide of
functions and options as below:
Touch Buttons:
There are four buttons under the LED display below:
There are four touch buttons under the display: Menu, Up, Down, Enter. Normally, the LED will display
the current DMX address code of the fixture. At this time, presses up and down to choose the functions
you want.
DMX Address Red Green Blue White Amber Flash
1-512 000-099 000-099 000-099 000-099 000-099 000-099
Fade Scroll Full On Effect Pixel Effect Built-in Modes Sound Dimmer Mode Operating Mode
000-099 000-099 00-0-099 00-15 ON/OFF NO/YES A /P / H
DMX Address. Press
Enter
to select the start address channel. The first display will let
you know what operation mode you are in. Use the
up/down
keys to select the desired
start address. Press
Enter
to confirm.
Red.
This function allows you to power the red LED’s from 0-100%, Use the
up/down
keys to select desired intensity setting Press
Enter
to confirm the setting.
Green. T
his function allows you to power the green LED’s from 0-100%, Use the
up/down
keys to select desired intensity setting Press
Enter
to confirm the setting
Blue.
This function allows you to power the blue LED’s from 0-100%, Use the
up/down
keys to select desired intensity setting Press
Enter
to confirm the setting
White. This function allows you to power the white
LED’s from 0-100%, Use the
up/down
keys to select desired intensity setting Press
Enter
to confirm the setting
Amber. This function allows you to power the amber
LED’s from 0-100%, Use the
up/down
keys to select desired intensity setting Press
Enter
to confirm the setting
