3
Features
●Multi-Colors ● Master/Slave synchronization
●Color Strobe ● LED operation menu
●Electronic Dimming 0-100% ● DMX-512 protocol
●Daisy Chain Units together in DMX Mode
● With Dot Sound Control
Safety Precautions
●
Be sure that the local power outlet match that of the required voltage for your unit,
●
Do not attempt to operate this unit if the power cord has been frayed or broken. Do not attempt to
remove or break off the ground prong from the electrical cord. This prong is used to reduce the risk
of electrical shock and fire in case of an internal short.
●
Disconnect from main power before making any type of connection.
●
Do not remove the cover under any conditions. There are user serviceable parts inside.
●
Never operate this unit when its rear cover is removed.
●
Never plug this unit into a dimmer pack.
●
Alwa
ys be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm)
between this device and a wall.
●
Do not attempt to operate this unit, if it becomes damaged.
●
During long periods of non-use, disconnect the units main power.
●
Always mount this unit in safe and stable matter.
●
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to the point they exit from the unit.
●
Cleaning unit should be cleaned only as recommended by the manufacturer. See ‘Cleaning” for
details.
●
Heat
–The appliance should be situated away from heat sources such as radiators, heat registers,
stoves, or other appliances (including amplifiers) that produce heat.
●
The unit should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits s marked change in performance.
DMX Linking
: To ensure proper DMX data transmission, when using several DMX units try to use the
shortest cable path possible. The order in which units are connected in a DMX line does not influence
the DMX addressing. For example; a unit assigned a DMX address of 1 may be placed anywhere in a
DMX line, at the beginning, at the end, or anywhere in the middle. When a unit is assigned a DMX
address of 1, the DMX controller knows to send DATA assigned to address 1 to that unit, no matter
where it is located in the DMX chain.
Operating Instructions
Operating Modes: You can use the unit in 4 ways:
●
Auto Mode-The unit will automatically chase through the different colors.
●
DMX control mode
– This function will allow you to control each individual units traits with a standard
DMX 512 controller.
●
Master-slave mode
– One unit will work as the master in the one of the above three modes, other
units in the chain will work in synchronization towards the master.
●
Sound control - The unit will react to sound, chasing through the built-in programs.