10
USING THE FREEWAVE MICRO
You can use the FreeWave Micro
to activate autofocus, trigger the
shutter, and open and close the
shutter while in bulb mode.
Autofocus
Press the transmitter’s shutter
release halfway. A blue LED
indicator on the transmitter will
light up, and the Focus LED on
the receiver will glow blue.
Taking a Shot
A full press of the transmitter’s
shutter release will take a picture
when everything is in focus. The
transmitter’s LED indicator will
change from bright to dim blue,
and the receiver’s shutter LED
will glow red.
Bulb Mode
1.
Set your camera to manual
mode, and change the shutter
speed to bulb.
2.
Press and hold the
transmitter’s shutter release
for three seconds to set the
camera to open the shutter
and activate bulb lock.
3.
Press the transmitter’s shutter
release to end the exposure
and close the shutter.