9
Setting the Channel on the
Transmitter and Receiver
1.
Slide open the transmitter’s
battery compartment cover.
2.
Using the channel selection
pin connected to the lanyard,
position each of the four DIP
switches up or down, into a
channel configuration.
3.
On the receiver, position
the DIP switches into the
same configuration as on the
transmitter.
4.
With the receiver on, press the
transmitter’s shutter release.
You should see the receiver’s
focus and shutter LEDs light
up, as well as the transmitter’s
LED indicator. If the two are
paired correctly, slide the
transmitter’s cover closed until
it locks. If not, repeat steps 2
and 3 until you reach a working
channel configuration.