background image

ONE-YEAR LIMITED WARRANTY

This VELLO product is warranted to the original purchaser to be free from defects in materials and workmanship 

under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after 

replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty 

shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal 

use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) 

shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves 

the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper 

installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER 

ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY 

IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty 

provides you with specific legal rights, and you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Vello Customer Service Department to obtain a return merchandise 

authorization (“RMA”) number, and return the defective product to Vello along with the RMA number and proof of 

purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.vellogear.com or call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com

VELLO is a registered trademark of the Gradus Group. © 2015 Gradus Group LLC. All Rights Reserved.

Summary of Contents for BG-C12













Reviews: