VTSSC73
10.01.2011
©Velleman nv
4
4.
Features
•
electronic temperature control
•
password lock
•
sensor and heater fail notification
•
LCD display with digital temperature scale (°C or °F)
•
with on/off switch
•
ceramic heating element with temperature sensor
•
HEATER FAILED DETECTION: if heater circuit fails the display will read “H--E” and heater power is
cut.
•
TEMPERATUE “LOCK-OUT” FEATURE: the temperature can be locked with a password which might be
useful in a production line.
•
ESD SAFE AND SPIKE FREE CIRCUITRY: the “Zero Voltage” electronic switching design also protects
voltage and current sensitive components (CMOS devices, etc.) against overcurrent and transient
voltage spikes.
•
LIGHTWEIGHT SOLDERING IRON: ergonomic mini handle that stays cool and prevents operator
fatigue.
•
isolated power supply: high-quality 230Vac transformer designed for lead-free soldering
•
temperature stability: tip temperature accurate to within ±5°C (9°F)
•
available options:
o
spare soldering bits: 0.4mm (BITC03), 0.8mm (BITC201), 1.6mm (BITC20)
o
spare soldering iron: VTSSC73/SP1
o
spare barrel and nut as heater holder: VTSSC73/SP2
5.
Overview
Refer to the illustrations on page
2
of this manual.
VTSSC73
1
display
7
barrel
2
SET-button
8
nut
3
down-button (
▼
)
9
bit
4
up-button (
▲
)
10
heater element
5
power switch
11
heater holder
6
earth connection
12
handle
display B
temperature unit (°C or °F)
A
temperature indication
C
heating indication
fuse replacement
X
screw
F
fuse
6.
Description
•
This soldering station is designed to meet the present and future needs of the electronic production
industry. The
VTSSC73
is engineered to meet the stringent demands of hobbyists, maintenance
personnel and production people alike.
•
A high-quality sensor and heat transfer technology ensure precise temperature regulation which is
essential for making consistent, reliable soldered connections.
•
The aluminium alloy housing has several advantages: strong, good heat sink and very resistant to
electro-magnetic interference.
•
The
VTSSC73
s’ electronic circuitry enables the user to set soldering temperatures between 150 and
480°C (302 to 896°F) without having to replace the tip or the heating element. The temperature is
maintained to within ± 5°C (± 9°F) of the normal operating temperature by a thermocouple sensor
placed in the head of the heating element. The 45W power results in a rapid heat-up and fast
recovery.
•
The revolutionary "zero voltage" switching design also protects voltage- and current-sensitive
components (CMOS devices, etc.) against the damaging current and transient voltage spikes
commonly produced by less efficient, mechanically switched stations. The heating elements are
galvanically isolated from the electrical supply by an isolating transformer that prevents the system
from using a max. tension higher than 230VAC.
